the appropriate indoor temperature by adjusting sunshade , which can effectively

More impressive than the appearance are the reborn carriages, where recycled cork, a material that absorbs carbon dioxide during production, has been used on top of dashboards, sunshades and doors as an alternative to traditional styrofoam. All other decorative panels are omitted, exposing the basic metal structure, which is painted blue here.

Minqing living room electric ceiling curtain FSS series reputation is good, 6. Energy saving and environmental protection: electric shutter windows can achieve the appropriate indoor temperature by adjusting sunshade, which can effectively reduce the heat load of air conditioning, absorb solar radiation energy and reduce heating load in winter, thus saving energy and reducing consumption. 5. Heat preservation and heat relief: electric shutter windows can effectively prevent strong outdoor light, maintain a steady state for indoor temperature, and are more suitable for work.

The general operating procedure for dashboard cleaning is to clean the dashboard with a dishcloth, and then treat the plastic part of the dashboard with detergent. Finally, use detergent to treat the rest of the dashboard. It should be noted that in the process of dealing with the dashboard, sunshades are used to protect the dashboard from being spoiled by sunlight.

Auto parts this round also on a lot of stocks, the expansion is too great. It used to be one in ten, but now it really has to be one in a hundred. An interior piece, the best choice is Huayu, Huaxiang and so on also have part of the interior decoration business. Now there are many more. Dai Mei, Xinquan and Changshu Auto Accessories are all a little famous in the industry, and the interior accessories are subdivided. Xinquan, Changshu Auto Accessories focus on dashboards and door guards, and Daimi focuses on sunshades. There are also the new coordinates of precision cold forgings, Desai Xiwei in the field of automotive electronics, Golden Kirin for systematic friction parts, and Huada Technology for stamping parts. Too much, too much.

PA has good impact resistance and strength. In the car body, it is mainly used to manufacture wheel front and rear cover, handle, door lock, seat belt fixing hinge, dashboard, fender, sunshade clamp, swing arm of seat back, gear, etc., in which the PA consumption of wheel cover is about 2kg/, which is a big market of nylon. However, when nylon is used as a large component, because the water absorption will cause size change or strength reduction, it can not fully maintain the performance of the parts, so it is necessary to modify PA.

6. Avoid direct sunlight and high temperature in the car. Dashboards and central control areas are mostly made of engineering plastics. plastics will age and fade when exposed to the sun for a long time, although manufacturers will do strict aging tests during development, but it is good to pay more attention. So it is necessary to keep a sunshade pad all the time;

Zhang Wei, deputy general manager of the Urban Deputy Central Station Integrated Hub Construction Management Co., Ltd., said that the “Jingfan” roof has built a perforated sunshade, which balances the cold and heat load and can rationally control the indoor light and heat environment. It is estimated that by adopting the “Beijing sail” scheme, the heat load can be reduced by 5.2 million kilowatt-hours per year, which is equivalent to the summer cooling capacity of 3200 household air conditioners, and the power consumption of lighting can be reduced by about 486000 kilowatt-hours per year.

The selector for driving mode is in the same position as the RC coupe: it “grows” to the right from the sunshade above the dashboard (symmetrically, on the left, there is the same selector to turn on / off the stabilization system). The selector handle rotates and rotates, while selecting one of the four modes, all of which are reset to the normal position (and when the engine is stopped and started) by pressing the button at the end.

Although the solar greenhouse has a very good thermal insulation performance, but from the point of view of safety, heating equipment is still an important factor. The southern part of our country generally does not need to heat up, but if we encounter bad weather continuously, we still need to use the energy stored in the greenhouse itself, otherwise it will not be able to meet the growth of vegetables. Therefore, whether in the south or north, heating equipment has always been a necessary protective measure. The technical aspect requires that in the equipment configuration of solar greenhouse, the configuration of thermal insulation equipment should be demonstrated in great detail. Of course, the work of Jining intelligent greenhouse requires the cooperation of a variety of equipment, with higher and higher temperature requirements, especially in autumn and winter production, external sunshade system, internal thermal insulation system and window opener and fan, wet curtain and other equipment need to be applied. For more information about Jining intelligent greenhouse, please contact Minghao greenhouse Engineering Construction Company directly.

As a new type of packaging material, plastic has been widely used in the field of packaging. For example, all kinds of hollow containers, injection molding containers, packaging films, woven bags, styrofoam straps, packing straps, etc. In terms of transport, the plastic used in vehicles, trains, ships and other means of transport and corresponding ancillary facilities is increasing year by year on a per-vehicle or per-vessel basis. Varieties include fuel tank bumper, sunshade seat, door handle, steering wheel, dashboard and so on The commonly used materials in agriculture are film, pipe, plate, rope, woven bag and so on. Plastic granule manufacturers introduce the packaging for plastic greenhouse, crop fertilizer and so on, plastic pipes for farmland and water conservancy projects, farmhouse construction, animal husbandry protection, agricultural machinery and utensils, fishing net culture, floating, etc.

The sun board integrates daylighting, thermal insulation and sound insulation, which can be used for greenhouse, furniture canopy, office sound insulation, outdoor advertising light box and so on. Foreign countries even appeared in addition to the supporting structure, pure polycarbonate material of large transparent lighting house, a sunshine, crystal transparent, warm and pleasant. In terms of greenhouse construction, there are greenhouses built with sunboards, gables and sidewalls using sunboards; in terms of greenhouse efficacy, there are production-based greenhouses, trade-oriented greenhouses dominated by the flower market, and greenhouses dominated by scientific research. Sunpanels are a widely used building material and can also be used in sunshades and canopies.