Looking at the interior decoration, the sunshade eaves in the middle of the Wuling 730 dashboard have been expanded, and the air conditioning outlet in the middle has become vertical. The layout of the central control button has changed. The interior of the Wuling 730 has become a light color system, and the dashboard has become a separate color.
Rear bumper, dashboard, etc. Body and body parts: body shell, hard shell roof, floor, door, radiator grille, front end plate, flow stopper, baggage warehouse cover, sunshade, wing panel, engine cover, headlamp mirror, etc. Parts under the engine cover: air conditioner shell, air guide cover, intake pipe cover, fan guide ring, heater cover, water tank components, braking system components, battery bracket, engine sound insulation board and so on. Interior decoration parts: door interior panel, door handle, dashboard, steering rod parts, mirror frame, seat and so on. Such as pump cover and other electrical components and gear sound insulation board and other drive system parts. Suspension parts: front.
Is it necessary to install car sunshade curtains? The advantage of the car sunshade curtain is to block the sun, so that the light in the action area can not enter the car, which can reduce the burning heat inside the car to a certain extent, and prevent the leather seat and dashboard from being damaged by ultraviolet rays. In addition, it has the function of increasing privacy, and it is not clear to see inside the car, which can increase safety factors.
Also confirmed the current market shipping difficulties, traders wait-and-see mood of the atmosphere. Recently, the technical overhaul of the second-line steel mills has increased in order to reduce the pressure of the steel mills themselves. Recently, it is rumored in the market that the pressure of project rebate has increased, and the consideration of site supply has increased in the later period. It is expected that the overall market will still be weak, and it is difficult to improve the decline. This kind of flower planting greenhouse is widely used in most areas, especially in the south. The single-family arch shed is mainly made of plastic-coated steel pipe or galvanized steel pipe, the surface is covered with film, and air vents are added on both sides. The utility model has the advantages of simple structure, low cost, easy construction and maintenance, long service life and strong resistance to wind and snow load. Its big deficiency is that the heat preservation capacity is low and the operation cost is high in winter, so it is suitable for breeding non-tropical flowers with low temperature requirements. Of course, we can add two-layer film on the original basis, increase the curtain machine quilt and other thermal insulation equipment, sunshade can effectively improve the arch shed temperature.
It is easy to cause the front end of the dashboard to tap the glass and produce abnormal noise. At this time, adding a sponge strip between the two can prevent the occurrence of abnormal noise and prevent small objects such as coins from falling into the car from the front of the dashboard. The most practical configuration: rotating sunshade, front sunshade most car owners may only know the normal telescopic function.
External shading mainly refers to covering the sunshade net on the outside of the greenhouse, which directly shields the solar radiation outside the greenhouse, which can effectively reduce the temperature in the greenhouse. At the same time, the external shading system can be active. with the continuous development of science and technology, there are more and more kinds of greenhouses, and greenhouses for cultivating all kinds of plants and organisms are also built, and a variety of methods are used to control the temperature in the heat preservation work. every week, when irrigation is carried out, the end of each drip irrigation pipeline is opened in turn, and the fine particles accumulated at the end of the eyedropper are flushed out with high-pressure water. The pipeline must be opened one by one to ensure sufficient pressure,
The forming technology of automobile interior knitting is mainly divided into weft knitting and warp knitting. There are two kinds of warp knitting machines: single-bed warp knitting machine and double-needle-bed warp knitting machine, single-bed warp knitting machine produces single-layer warp-knitted fabric, double-needle-bed warp knitting machine produces double-layer warp knitted fabric, and after getting off the machine, the cashmere yarn connecting the upper and lower layers is cut off by the cutting machine, which is cut into two pieces of warp-knitted fabric and wound separately, and the automobile spacer fabric can also be produced. Warp knitted single needle bed fabric can be used as automobile seat accessories, ceilings, sunshade curtains, etc., while double needle bed fabrics can be used for seat ventilation and heating, instrument panel and door panel lining, etc.
Traditional interior parts cover a wide range of products, including ceilings, door panels, dashboards, etc., with a bicycle value of about 1,000 yuan, as well as headrests, sunshades, posts, carpets, etc., which are worth about 100 yuan. It is estimated that the total bicycle value of the whole traditional interior track (excluding seats) can reach 5000 yuan or even 10000 yuan.