It is necessary to do a good job of heat preservation at night and ventilation and humidity reduction during the day. The night temperature in early spring is still low, which needs to be covered with grass curtain, sunshade net, non-woven fabric or multi-layer mulching; the temperature rises rapidly during the day, coupled with the current high humidity in the field, so it is necessary to timely control and adjust the indoor air humidity and temperature in the shed. On a sunny day, after the temperature picks up after 08:30, ventilation should be carried out gradually, and the mulch such as non-woven fabrics should be removed in time to increase the light; the shed should be closed and the warmth should be covered before 4 p.m. In case of cloudy and rainy weather, it is still necessary to properly ventilate during the day to reduce the humidity in the shed. In addition, in the alternate season of late winter and early spring, the weather changes greatly, so we should pay close attention to the weather changes to prevent the occurrence of late spring cold. After the middle of April, the average temperature is stable above 15 ℃, which can remove the inner shed, prolong the opening time of the outer shed, increase the light time and intensity, reduce the humidity in the shed, and control the occurrence and prevalence of diseases such as leaf mold and gray mold.
3. The use or storage of rubber soft joints should avoid high temperature, ozone oil and acid-base environment. Sunny outdoor or windward pipes should be set up sunshade. Rainstorm, rain and wind turbidity are strictly prohibited. It is forbidden to brush paint or wrap thermal insulation materials on the surface of the joint.
Traditional interior parts cover a wide range of products, including ceilings, door panels, dashboards, etc., with a bicycle value of about 1,000 yuan, as well as headrests, sunshades, posts, carpets, etc., which are worth about 100 yuan. It is estimated that the total bicycle value of the whole traditional interior track (excluding seats) can reach 5000 yuan or even 10000 yuan.
After refreshing yourself in the restaurant, start purchasing camping equipment. Whether you are a short trekking camping or moving camping, the special area of “escape from the city” has everything. Jane can be a picnic blanket to accommodate everything, while the essence has a sunshade and wind canopy with tables and chairs, which can be quickly selected or removed in sets ~
2. Sunshade. The membrane structure parking shed adopts polycarbonate material with high impact resistance, and its strength is about 200 times that of glass. The raw materials are imported from Germany and processed in China. Through the double-sided co-extrusion process, the anti-ultraviolet material (UV) is added, which can effectively block more than 98% of the ultraviolet rays, protect the car surface paint, effectively control the continuous rise of the interior temperature, and in direct sunlight. The temperature in the car can reach more than 60 ℃ and can be effectively reduced to about 40 ℃ after installation. At the same time, it also has flame retardant effect, and can be used normally for more than 30 years in the environment of-30 ℃ to 60 ℃ (137 ℃ thermal deformation). The downcomer is made of high-strength aluminum alloy and has a unique user-friendly design to avoid the second pollution to the car and you when the roof water falls to the ground. The structure is reasonable and easy to clean, and it is convenient for the membrane structure parking shed to remove dirt in the pipe.
Xin Test Standard has long carried out automotive functional testing (automotive seats, internal and external accessories (door panels, dashboards, sub-dashboards, sunshades, bumpers, evaporators, etc.), automotive wiring harness and lights, chassis and transmission, hose pulse), automotive prohibited substances testing, volatile organic compounds VOCs testing, polymer material testing, metal material testing, environmental reliability testing, automotive electronics and other testing business.